BASEPLATE ESCALADE AVALANCHE TAHOE YUKON SILVERADO SIERRA 1500 [MX] (2)

$437.06
In stock
SKU
3154-3
BASEPLATE ESCALADE, AVALANCHE, TAHOE, YUKON, SILVERADO, SIERRA - 1500 [MX] (2), Vehicle Baseplate; MX Series; Removable Tabs; Without Safety Cable; With Two 5/8 Inch x 2 Inch Bolt/ Two 5/8 Inch Lock Washer/ Two 5/8 Inch Plate Washer/ Four 1/2 Inch x 5 Inch Bolt/ Two 1/2 Inch x 1-1/2 Inch Bolt/ Six 1/2 Inch Lock Washer/ Six 1/2 Inch Nut/ Four 3/8 Inch x 1-1/4 Inch Bolt/ Four 3/8 Inch Lock Washer/ Four 3/8 Inch Nut/ Two Draw Pins, Spring Pins/ Two 1/4 Inch x 2-1/2 Inch x 2-1/2 Inch Backing Plate/ Four 10 Inch x 1-1/4 Inch x 2-3/4 Inch Backing Plate/ 2 Side Arm/ 2 Side Receiver/ 2 Lower Brace

Attributes

  • Tab Type: Removable
  • Number Of Lugs: 2
  • Material: Steel
  • Color: Black
  • Includes Safety Cable Hooks: No
  • Estimated Install Time (Hours): 3
 

Product Description

The visible portion of the brackets, the "front arms," can be easily removed when not towing — remove two hitch pins to convert from towed car to road car in seconds.
 

Features & Benefits

  • Virtually Invisible — Improved Aesthetics
  • Computer-Cut, All-Steel Components For Exceptional Strength
  • Most Install Through The Grille — No Scraping Brackets In Dips Or Against Curbs
  • Easy To Install — ROADMASTER Brackets Use Existing Attachment Points On The Vehicle's Undercarriage — No Welding
  • Limited 1 Year Warranty

Double Check all Measurements before ordering. 

 

 

  •  2007-2014 Cadillac Escalade
    • 2007 Cadillac Escalade
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2008 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2009 Cadillac Escalade Hybrid
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2009 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2010 Cadillac Escalade Hybrid
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2010 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2011 Cadillac Escalade Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2011 Cadillac Escalade Hybrid
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2011 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2012 Cadillac Escalade Hybrid
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2012 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2012 Cadillac Escalade Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2013 Cadillac Escalade Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2013 Cadillac Escalade Hybrid
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2013 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2014 Cadillac Escalade Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
    • 2014 Cadillac Escalade Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Verify Towability With Manufacturer
  •  2007-2014 Cadillac Escalade ESV
    • 2007 Cadillac Escalade ESV
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Cadillac Escalade ESV Premium
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Cadillac Escalade ESV Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Cadillac Escalade ESV Platinum
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Cadillac Escalade ESV Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Cadillac Escalade ESV Platinum
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Cadillac Escalade ESV Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2014 Cadillac Escalade ESV Platinum
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2014 Cadillac Escalade ESV Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2014 Cadillac Escalade ESV Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
  •  2007-2013 Cadillac Escalade EXT
    • 2007 Cadillac Escalade EXT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 Cadillac Escalade EXT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 Cadillac Escalade EXT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 Cadillac Escalade EXT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Cadillac Escalade EXT Premium
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Cadillac Escalade EXT Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Cadillac Escalade EXT Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Cadillac Escalade EXT Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Cadillac Escalade EXT Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Cadillac Escalade EXT Luxury
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Cadillac Escalade EXT Base
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
  •  2007-2013 Chevrolet Avalanche
    • 2007 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2008 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2009 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2010 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2011 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2012 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2013 Chevrolet Avalanche
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
  •  2007-2013 Chevrolet Silverado 1500
    • 2007 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Chevrolet Silverado 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
  •  2007-2014 Chevrolet Suburban 1500
    • 2007 Chevrolet Suburban 1500 LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2007 Chevrolet Suburban 1500 LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2007 Chevrolet Suburban 1500 LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2008 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2009 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2010 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2011 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2012 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2013 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2014 Chevrolet Suburban 1500
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
  •  2007-2014 Chevrolet Tahoe
    • 2007 Chevrolet Tahoe
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2014 Chevrolet Tahoe LTZ
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2014 Chevrolet Tahoe LT
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2014 Chevrolet Tahoe LS
      • Requires Some Trimming Of The Air Dam
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
  •  2007-2013 GMC Sierra 1500
    • 2007 GMC Sierra 1500 SLT
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2007 GMC Sierra 1500 SLE
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2007 GMC Sierra 1500 Denali
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2007 GMC Sierra 1500 WT
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2008 GMC Sierra 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2009 GMC Sierra 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2010 GMC Sierra 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2011 GMC Sierra 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2012 GMC Sierra 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
    • 2013 GMC Sierra 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
  •  2007-2014 GMC Yukon
    • 2007 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2008 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2009 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2010 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2011 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2012 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2013 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2014 GMC Yukon
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
  •  2007-2014 GMC Yukon XL 1500
    • 2007 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2008 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2009 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2010 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2011 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2012 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2013 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
    • 2014 GMC Yukon XL 1500
      • Requires Some Trimming Of Bumper (Fascia, Plastic, Grill)
      • This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. This bracket is designed for heavier vehicles. Make sure the tow bar you use exceed the weight of the vehicle to be towed when full loaded. Anchor brackets for Sterling cables WILL NOT FIT MX or MS style brackets. To use MX or MS bracket with Sterling tow bar, the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket.
      • Without Brush Guard
More Information
Weight 39.000000
mfg_part_number 3154-3
upc 758306308992
additional handling yes
oversized yes
Write Your Own Review
You're reviewing:BASEPLATE ESCALADE AVALANCHE TAHOE YUKON SILVERADO SIERRA 1500 [MX] (2)

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Copyright © 2025-present RV-Mall. All rights reserved.